The differences between ceramic porcelain mug and bone china mugs

From Xin xiang Ceramic Mug Manufacturer, Basically, everyone uses ceramic mugs in their homes. In fact, it is not that ceramic mugs are bad, but compared to bone china mugs, I prefer to replace all ceramic mugs with bone china mugs.

The reason for this will be explained to you slowly and see if you will make the same decision as me, that is, to replace all the ceramic mugs in your house with custom bone china mugs.

What is a bone china mug

First of all, what I want to tell you is that bone china is a kind of porcelain made by adding animal bone charcoal, clay, feldspar and quartz as basic raw materials, and then going through a production process similar to ceramics.

Of course, the country has a standard for the content of bone charcoal added, and only those with a bone charcoal content of 36% or more in porcelain are considered bone china. Moreover, bone china usually has the action of entering the kiln twice, at first it is biscuit firing, and then glaze firing.

So, bone china mug is a mug made of bone china material, it will definitely be much better than ordinary ceramic mug, you can continue to look down.

What are the advantages of bone china mugs:

1. Good appearance

Due to the use of animal bone charcoal, the fired porcelain is more delicate and transparent. With such good porcelain, drawing patterns is like having a solid foundation to build a high-rise building. It can make the whole bone china mug look very delicate and beautiful.

2. High grade

Because you have to know that bone china has always been a long-term choice of porcelain materials used by the British royal family and nobility. Now that our living conditions are better, we can use better bone china mugs to make our lives more advanced.

3. Higher precision in process

In this market environment where the pursuit of speed and quantity is pursued, many businesses have actually given up strict control over quality. In the final analysis, it is of course the consumers who will suffer. However, bone china mugs need to undergo secondary calcination, and the process precision is very high. Therefore, if you want to save costs and reduce quality, bone china mugs cannot be made.

4. Difficult to process

A shaped bone china mug must go through a lot of processing procedures. However, the difficulty of processing is not simple at all. It requires comprehensive consideration of its regularity, whiteness, transparency, thermal stability and other physical and chemical indicators, so the scrap rate is also very high. This makes people feel that the bone china mug in your hand is so precious.This report from china ceramic mug group.

Which kind of ceramic coffee mugs is better customized for you?

 From Xin xiang Ceramic Mug Manufacturer,In this fiercely competitive market environment, if you want to sell a product, you have to break your scalp, and we are no exception. We have always wanted to use European household products to bring you a high-quality life experience. This is our philosophy.

Today I planted this customized ceramic coffee mugs for everyone, and it depends on whether you like it.

Where is its selling point?

If anyone who sells coffee mugs does not know what their ceramic coffee mugs are selling, should they still sell things?(from china ceramic mug suppliers yellow pages)

Our European-style coffee mug set, its first selling point is: draw gold edges at any cost In order to bring out the high-end and luxury of ceramic coffee mugs, we feel that only Phnom Penh can be better represented. But the more the gold border is drawn, it means that the cost of the ceramic coffee mug will be higher. In this way, if it reaches consumers, the price of coffee cups will become very expensive.

Of course, we do not want to increase the price of coffee mugs because of the increase in gold. While controlling costs, we keep the price of ceramic coffee mugs at an acceptable level for consumers.If you want to know more information or get quote,please contact us Xinxiang ceramic mug manufacturer.

Ceramic Coffee Mug Grinding Standard - Xin xiang custom mug factory

 From Xin xiang Custom Ceramic Mug Manufacturer,Qianjie Coffee recently launched a new Rwandan coffee bean. Take it as an example. For Qianjie Coffee, how to determine the mug grinding degree and how to perform the mug measurement process.

Coffee mug test process

Before the mug test, Qianjie Coffee will roast the coffee beans in multiple curves, and then use the mug test to determine which curve has the more outstanding flavor. In the past, the newly launched Rwanda micro-batch of washed beans by Street Coffee, for example, we roasted a total of three different curves. After baking, ensure that there is 24 hours of ripening time before cupping.

At present, there are two main cupping procedures commonly used internationally, which are formulated by the Specialty Coffee Association of America (SCAA) or the Mug of Excellence (COE). Qianjie Coffee uses the COE cupping process. The cupping test is mainly divided into two steps, one is smelling the fragrance, including dry and wet fragrance, and the other is tasting and sipping. The aroma (Aroma), cleanness (Clean Cup), sweetness (Sweet), acidity (Acidity), mouth touch, flavor (Flavor), aftertaste (Aftertaste), balance (Balance), overall ( Overall) for scoring description.

Front Street Custom Coffee Mugs Score Sheet

Cupping needs to prepare these appliances: grinder, Chinese standard No. 20 screen, thermometer, electronic scale, cup measuring bowl, water cup, cup measuring spoon, timer, paper towel.

Front Street Coffee confirms that the grinding degree of coffee beans is based on the COE grinding standard, which passes the standard No. 20 screen 70-75%. Qianjie Coffee sieved the Rwandan coffee beans of three different curves, and determined the cup grinding degree of BG#5J (the grinding degree of the three curves).

Also according to the COE cup measurement standard, Qianjie Coffee determined that the water temperature is 94 degree and the ratio of powder to water is 1:18.18, that is, 11.3 grams of coffee powder and 200 ml of water. The dry aroma must be measured within 15 minutes after grinding.

Front Street Coffee Rwanda Coffee Bean Cupping Process

The grinding degree has been determined above, and the coffee beans can be weighed. Qianjie Coffee recommends weighing more, so that it is convenient for the grinder to wash the beans. The beans must be washed every time a curve is ground. Place it as close to the table as possible, and mark the curve with a label to avoid confusion. You can smell the dry fragrance at this time. Inject hot water of 94 degree, and time the water at the same time. Within 4 minutes, smell the wet fragrance, and when the time is up, smell the fragrance of the slag and remove the slag. Qianjie Coffee often invites guests to participate in our cupping sessions. When it comes to smelling the fragrance, many people say that they can not smell it. They seem to be the same. In fact, the senses require multiple training, and Qianjie Coffee is no exception.Ceramic mug group

After picking up the dross, you can sip it and analyze it from the aspects of cleanliness, sweetness, acidity, oral touch, flavor, aftertaste, balance, and overall. Before the cup test, Qianjie Coffee will do a lot of fragrance correction exercises to exercise sensory cognition.

McDonald will pilot recyclable ceramic coffee mugs in the UK

 From Xin xiang Ceramic Mug Manufacturer,Recently, McDonald of announced that it will cooperate with Loop packaging service platform to try out reusable coffee mugs in some restaurants in the UK. This plan is expected to begin in 2021. At the same time, McDonald's will continue to reduce the use of traditional disposable paper coffee mugs.

However, the "shared coffee mug" is a bit complicated to operate. If you want to use this kind of mugs, customers need to pay a deposit first, and pay to buy a recyclable cup. After drinking the drink, the customer returns the cup and the deposit is refunded. The refund point can be in the store or directly returned to the collection point prepared by Loop. Loop will clean and disinfect these mugs, and arrange for the next release.

In addition to these operating procedures, the widespread use of custom coffee mug supplier also need to consider some other factors. For example, since the cups used by customers are paper each time, Loop of workmanship and disinfection capabilities on the mugs become particularly important; not only that, because the secondary use of mugs may involve health and hygiene issues, the market of Acceptance is also unclear. Many people may still be unable to accept "sharing a cup with strangers" psychologically.

Not only that, in terms of environmental protection, this McDonald ceramic coffee mugs is not completely degradable. In order to prevent hot drinks and other special drinks from damaging the cup, the inside of the paper cup is still designed with a plastic coating. For this, although Loop is already looking for a new solution, the "shared coffee mugs" solution is mainly through recycling, reducing the total consumption of paper mugs.China ceramic mug factory

Ceramic Mug Suppliers tell you How are different coffees made up

 From Xinxiang Custom Ceramic Mug Manufacturer,Espresso is an espresso brewed in a high-pressure manner, and is often drunk with milk or the like. There are also many types of espresso-based coffee.

Milk coffee

1. Finely grind the deep-roasted coffee beans into a powder and make it thicker. Milk coffee is a drink made by mixing milk and coffee. Therefore, the taste of milk will not exceed the taste of coffee.

2. Heat the milk until the heat rises. But be careful not to boil the milk.

3. Pour milk into the mug and remove the film on the surface.

4. Pour coffee into milk. The recommended ratio is 3: 7 for coffee and milk.

Milk ice coffee mug

1. Put ice cubes in the glass. The ice cubes that have just been frozen are not very strong, so use ice cubes that have been frozen for a few days.

2. Pour the milk. If you use a frother for milk, stir it well, the taste will be smoother.

3. Pour the strong ice-quenched coffee from above. Pour slowly, and it will show beautiful layering. The recommended ratio is 3: 7 for ice and coffee and milk.

Iced coffee

1. Put the filter pot into a bowl containing ice water. The deep-roasted coffee beans are ground into a fine powder and slowly washed in with hot water.

2. After removing the filter mug, stir with a bubbler immediately. By cooling down quickly, ice-quenched coffee with higher purity can be obtained.

3. Put ice cubes in the glass and pour coffee.

Xin Xiang Ceramic Mug Manufacturer Co., Ltd located in Shandong province China, which is one of the most famous ceramic producing Area. After experienced 20 years of ceramic business and development, we become a professional and reliable ceramic mugs supplier. Our annual turn-over more than RMB300millons .Our factory have SEDEX audit, NBCU audit, Disney audit, Wal-mart audit ect......

Xinxiang company business include ceramic mugs, ceramic coffee cups,sublimation mug manufacturer, tea cups and saucers, fine bone china mugs, promotional mugs, eco cups, musical/melody mugs, color changing mug/magic cups, solid color mugs ,coated mug, dinnerware sets, tableware, couple mugs, plates, bowls ect, Materials: porcelain, stoneware, magnesia strengthen porcelain, fine bone china . There are variety designs and shapes for your selection, customers' own designs are welcomed.

How are pinholes formed in ceramic mugs - China mug manufacturers

 From  Xin xiang Ceramic Mug Manufacturer,In the production of ceramic mugs, pinhole is a very common quality problem. In particular, the problem of pinhole is more serious. So what are the reasons for pinholes on ceramic mugs? How to prevent it?

The formation and prevention of pinhole on ceramic mugs can be divided into three reasons: 1. The molding mold is too wet; 2. The slurry is too viscous; 3. The grouting speed is too fast.

Therefore, to solve the pinhole problem, we must make a general judgment from these aspects, and then analyze and solve the specific problems. If the mold problem, we should consider whether the mold frequency is too fast, or natural weather problems, or indoor drying equipment problems, or the mold has reached the use limit, need to replace a new mold.

If there is a mud problem, it is necessary to comprehensively consider various reasons to solve the problem. Mud viscosity is not necessarily due to the small amount of water added during the grinding process or the problem in the proportion of other raw materials. It may be that the viscosity of the mud is affected by changes in weather and temperature. Therefore, it is necessary to comprehensively consider and solve the problem from various aspects.

Of course, the grouting speed should be comprehensively analyzed according to the specific environment, temperature and other factors.

Custom Ceramic mug with lid products have very complex molding factors, these factors affect and restrict the quality of products, so to learn ceramic technology, we must first develop the habit of thinking about problems from many aspects, which is the premise of learning ceramic technology.

Production process and history of China color changing mugs melody

 From Custom ceramic mug Manufacturer,color changing mug using thermal process - the need in ceramic handicraft surface coating layer of some special requirements of transparent resin with a printer to paper flowers special hot sublimation ink printing ink, or special paper in through certain pressure and temperature heat transfer, and the good will of ceramic layer on the glass.

color changing mug using heat sensitive ink color temperature, because of its color process, say again "reversible can change color ink. Extinction temperature inversion as temperatures rise, showed a bottom layer.

mug modelling, colour is rich. Fill in the basic to drink for purpose, under the premise of mug body can be designed into animals, plants, such as the character animation different modelling, also have big ring, small loop, and even open loop, etc. Families often mug can usually filled fluid 150 milliliter to 350 ml. There are a few large beer mug can hold 500 milliliter control of liquid filled.

Jinan Xin Xiang Ceramic Mugs Industries Co.,Ltd located in Shandong province China, which is one of the most famous ceramic producing Area. After experienced 20 years of ceramic business and development, we become a professional and reliable daisy-used ceramics supplier. Our annual turn-over more than RMB100millons .Our factory have SEDEX audit, NBCU audit, Disney audit, Wal-mart audit ect......

Xinxiang company business include ceramic mugs, ceramic coffee cups, tea cups and saucers, fine bone china mugs, promotional mugs, eco cups, musical/melody mugs, color changing mug/magic cups, solid color mugs ,coated mug, dinnerware sets, tableware, couple mugs, plates, bowls ect, Materials: porcelain, stoneware, magnesia strengthen porcelain, fine bone china . There are variety designs and shapes for your selection, ceramic mug group designs are welcomed.

Xinxiang Company provide all goods with high quality at competitive prices, those help us own all of our customers' Trust. The customers are mainly from East-south Asia, European, Africa, America...... We will keep in working hard and truly hope to become your most reliable supplier in China.