6 Production processes of ceramic mug sublimation mug coffee mug

 Xin xiang Ceramic Mug Manufacturer, The following is the production process of the ceramic mug, I hope it can help you.

1. Practicing mud: Porcelain stone is taken from the mining area, pounded with water, elutriated to remove impurities, and precipitated into brick-like mud. Then mix the mud with water to remove the slag, rub it with your hands or step on it with your feet to squeeze out the air in the mud and make the water in the mud even.

2. Drawing the billet: Throw the mud ball at the center of the turntable of the potter's wheel, and draw the rough shape of the billet by flexing and stretching.

3. The impression of the blank: the shape of the impression is to be rotated according to the arc inside the blank, and the semi-dry blank is placed on the mold, and the outer wall of the blank is evenly pressed, and then demolded.

4. Rigid billet: Lay the billet on the sharp bucket of the potter wheel, rotate the turntable, and use a knife to turn the billet to make the billet thickness appropriate and the surface and the inside smooth. This is a process of promotional ceramic mugs with high technical requirements.

5. Expose the billet: Place the processed billet on a wooden rack to dry.

6. Carving: Use bamboo, bone or iron knives to carve patterns on the dried or semi-dried body.

7. Glazing: Xin xiang ceramic mug factory think: Ordinary round mouth adopts dipping glaze (dip the blank into the glaze basin, and raise it immediately when the mouth is flush with the glazed surface) or glaze (pour the glaze slurry into the blank and shake it to make the top, bottom, left, and right glaze evenly, and then quickly Pour out the excess glaze slurry), cut ware (compared to "round ware", "round ware" refers to round utensils that are formed by the drawing method, such as bowls, plates, dishes, etc. The molding process is more complicated. Such as bottles, statues, pots, pots, etc., are called "cutting tools") or large round wares with blowing glaze (the method is to cover the bamboo tube with fine yarn, dipped in the glaze and spray with the mouth. Repeat this many times, the blank surface can get the thickness Uniform glaze layer).

8. Kiln: The time course is about one day and night, and the temperature is about 1300℃. Build the door of the kiln first, ignite the kiln. The fuel is pine firewood, guide the piling technique, measure the fire time, grasp the temperature change of the kiln, and decide the ceasefire time.

9. Color glaze: On-glaze colors such as multicolored and famille rose are used to draw patterns and fill colors on the glazed surface of the fired porcelain, and then burn it in a red furnace at a low temperature, at a temperature of about 700℃-800℃. In addition, before firing the kiln, paint on the green body, such as blue and white, red in glaze, etc., it is called red in glaze, which is characterized by color that will never fade under high temperature glaze.

Firing method of custom ceramic coffee mug

1. One-time firing method. That is, after the dried green body is glazed (there are also unglazed), it is put into the kiln and fired (also called the hon-yaki), such as the fine porcelain blue and white porcelain of Jingdezhen, the color glaze (lang red, sacrificial red) , Ujin and other colored glaze porcelain), blue and white Linglong, etc. are all fired at one time.

2. Two firing method.  Ceramic mug supplier think so, There are low-fire and high-fire biscuit. The former is to use low temperature to burn the dried green body, then hang the glaze, and then enter the kiln to burn at high temperature. There is also a kind of biscuit to increase the water absorption and strength of the body so that it is easy to hang the glaze without being damaged (such as some thin porcelain tires). Only the green body is burned to about 700-960°C, also called biscuit. After being glazed, the unfired slab is put into the kiln and fired according to the one-time firing method. Hard and fine daily-use white porcelain in countries all over the world uses this method. The latter is to first burn the blank at high temperature (1260-1280°C), and then perform low-temperature glaze firing (950-1050°C), such as daily fine pottery and bone ash porcelain.

A comprehensive understanding of the production of ceramic mugs and 4 selection methods

 Xin xiang Ceramic Mug Manufacturer, Ceramic mugs are a kind of daily drinking utensils. Because ceramic mugs have their own characteristics: health, environmental protection, heat preservation, and personality, ceramic mugs are generally used for hot drinks such as milk, coffee, and tea. The mug body is generally standard cylindrical or quasi-cylindrical and has a handle on one side of the mug body. The shape of the handle is usually a half ring. Our custom ceramic mugs are divided according to their raw materials and firing process: ceramic mugs, white porcelain mugs, bone china mugs and stoneware mugs. Xinxiang Ceramic Mug Factory will systematically introduce ceramic mugs today.

1. The "core" of the ceramic mug - porcelain clay:

The raw material of the ceramic mug is china clay. The composition of China clay is mainly kaolin, and contains feldspar, quartz stone and mullite components. Porcelain mugs kneaded from china clay - biscuits, are fired in a kiln. The ceramic mug carcass of Xinxiang Ceramics Factory needs to be fired at a high temperature of 800°C to 1300°C to have the physical properties of porcelain. Because the porcelain clay is different, the firing temperature is also different, and the sintering shall prevail. The ceramic mug fired in this way looks ugly. The color is off-white, the surface is not smooth, and the water absorption and air permeability are high. Such a mug cannot be used directly. We need to cover the outer layer of the mug with a layer of film—glaze.

2. The "clothes" of ceramic mugs - glaze:

The ceramics we use every day are generally covered with smooth and smooth clothes, especially daily-use ceramics, which are more particular about "clothes". Some are as white as jade, and some are colorful and very beautiful. This kind of clothes of ceramics is called "glaze"

Glaze is a continuous vitreous layer attached to the surface of a ceramic body, or a mixed layer of vitreous body and crystal. The glaze may be produced by the calcium-containing stones and charcoal ash used in the ancient Leishi cooking, or it may be inspired by the beautiful texture of the shell surface, and it is consciously made of shell powder as a raw material. Xinxiang Ceramics Factory learned that as early as the Shang Dynasty in China more than 3,000 years ago, our ancestors had learned to use rocks and mud to make glazes to decorate ceramics. In the Han Dynasty, paper-warm lead glaze using lead as a flux was invented. Later, ceramic artists took advantage of the phenomenon that kiln ash naturally fell on the body and could be combined into glaze, and then used plant ash as a raw material for glaze making. The glazes used in the production of modern ceramic mugs are divided into lime glaze and long ancient glaze. Lime glaze is made of glaze fruit (a natural mineral material similar to porcelain stone) and gray glaze (mainly composed of calcium oxide). Feldspar glaze is mainly composed of quartz, feldspar, marble, kaolin, etc. Adding metal oxides to lime glaze and long ancient glaze, or infiltrating other chemical components, will become a variety of glaze colors.

Generally, the thickness of the glaze is only 1%-3% of the thickness of the body, but after being fired in the kiln, it is tightly attached to the porcelain body, making the porcelain dense, soft, and impervious to water and air, giving people a bright mirror-like appearance. Feel. At the same time, it can improve the use intensity, prevent pollution, and facilitate cleaning.

There are many types of glazes. According to the body, there are wholesale porcelain mugs, pottery glazes and flint glazes; according to the firing temperature, glazes fired below 1100°C are called low-temperature glazes, and glazes fired between 1100°C and 1250°C are called low-temperature glazes. The finished glaze is a medium-temperature glaze, and the glaze fired above 1250°C is a high-temperature glaze; according to the characteristics of the glaze surface, the white glaze is probably because people love silverware, and the colored glaze is welcomed by people because of its colorfulness. The patterns of the glaze change beautifully, the kiln pattern glaze is dazzling and beautiful, and the cracked glaze is clear, simple, elegant and unique. In addition to the above, there are matte glaze, opacified glaze, salt glaze and so on.

The above ceramic raw materials and production knowledge are too professional for us, and have no practical application significance. We usually buy printed ceramic coffee mugs by ourselves or accept promotional mug gifts from companies. So how do we choose ceramic mugs?

1. Look at:

It is mainly to observe the color and texture of the ceramic cup with eyes. Ceramic cups are divided into manual and mechanical glazing. According to the technology, it is divided into: dipping glaze and spraying. Most ceramic cups are glazed by hand and supported by a tray, so there is always a circle at the bottom of the coffee cup that is not glazed. The bottom of the unglazed ceramic cup is rough, and its width and position vary according to the processing technology. Some of the rough surfaces are at the bottom of the ceramic cup, and some are on the inner side of the bottom of the ceramic cup. When choosing a corporate promotional gift cup, we should choose a cup with bright color and uniform color.

2. Touch:

Touch the ceramic mug with your hands, choose a smooth ceramic mug, especially the mug mouth and outer wall, and also pay attention to the inner wall of the mug. Touch whether the handle is smooth and whether the bottom of the mug has been polished.

3. Weigh:

Weigh the weight of the pottery ceramic cup with your hand. In the case of the same size, the heavier ceramic cup has a thicker body, better heat resistance, and is stronger and more resistant to falling. On the contrary, under the same size, the bone china cup is thinner, has better heat dissipation performance and is lighter.

4. Listen to:

Flick the edge of the ceramic mug with your fingers and listen to the sound. If the sound of the ceramic mug is thick and stuffy, the mug is made of more materials and has good heat resistance; if the sound of the ceramic mug is crisp and loud, it has strong thermal conductivity.

Ceramic mugs are made from mud and rocks by fire. Sublimation coffee mugs will not waste our living resources, nor will they pollute the environment, nor will they destroy resources, and they are non-toxic and harmless. Xinxiang Ceramics Factory believes that the selection of ceramic mugs reflects the awareness of environmental protection and the care of our living environment. Most ceramic mugs are different due to custom picture or color. If the enterprise needs to design or customize ceramic mugs, please contact Xinxiang Ceramic Mug Manufacturer.

Original website: A comprehensive understanding of the production of ceramic mugs and 4 selection methods

How to choose right ceramic coffee mugs, promotional ceramic mugs custom logo

 Xin xiang Custom Ceramic Mug Manufacturer, In the past two years in China, there has been an upstart in the coffee market who claims to be competing with Starbucks, and it is Luckin Coffee.

On May 17, Luckin Coffee was listed on NASDAQ in the United States, and the issue price was determined to be US$17. After leveraging the big cake in the coffee market, this internet celebrity "friend" around him aroused people's curiosity: What kind of brand is Ruixing? Why did you hand in an amazing transcript in such a short time? Professor Zhong Weiguo explained the story of Ruixing Coffee for everyone in the second "Guanghua E Conference" event.

Predecessors paving the way, younger generations innovating, Custom Starbucks mug factory and Luckin are holding hands in the Chinese coffee market

The total global coffee market is about 12 trillion (data in 2018). The United States accounts for about 1/4 and China accounts for 1%. However, the growth rate of China's coffee market in recent years has reached about 18%, compared to only 2% in the world - China has huge room for growth.china sublimation mug suppliers

The support of this growth space is the sustained and stable development of the Chinese economy. China's per capita GDP in 2017 was about 7,300 U.S. dollars, in 2018 it was 7,700 U.S. dollars, 2022 is expected to reach 8,600 U.S. dollars, and in 2025 it will reach 11,000-the key point is 10,000 U.S. dollars. From historical data, the consumption behavior of people whose per capita GDP reaches 10,000 US dollars will reflect the group phenomenon of consumption upgrade. With the release of 20% of China's urbanization space (a process of gradually moving from 60% to 80%), especially the new urbanization based on the construction of a modern metropolitan area (refer to the National Development and Reform Commission's "About Cultivating Development" in February 2019 "Guiding Opinions on Modern Metropolitan Areas") will make the consumption upgrade of the population more rapid. The competition between Starbucks and Luckin Coffee is not as fierce as the outside advertised, but at the same time facing each other a large and rapidly growing market. Coffee Research Institute pointed out that by 2020, the capacity of China's coffee market will grow from 70 billion yuan in 2015 to 300 billion yuan. Therefore, how to conquer the city in the future space is a question that every company must think about. Luckin Coffee's simple and rude "Internet + capital + marketing" play has actually helped the entire industry. Many coffee companies want to promote and educate coffee culture in China, but they feel helpless. Luckin's overwhelming propaganda happened to be the largest and still successful coffee market education event. Understanding the background of the times is the key to understanding the current so-called "coffee revolution." wholesale corporate gift mug

Both Luckin and Starbucks need to face a major social transition closely related to consumers-this is a market opportunity.