How to bake pink glaze on ceramic coffee mugs correct

From Xinxiang Ceramic Mug Manufacturers,First of all, there are very bright colors, such as rose red and pure pink. These colors can be printed when printing floral paper, but the color will change when the flowers are baked at high temperature (the normal baking temperature is between 760 degree and 800 degree). Of course, the color of flowers can not be made by low temperature printing. The baking temperature of low-temperature flower paper should not exceed 180 degree. At such a temperature, the color agent will be cooled down without complete volatilization, so that any color printed on the paper can be retained. However, because the temperature of 180 degree can not reach the melting point of the ceramic glaze, the ceramic glaze does not have any change, which will make the pigment on the floral paper unable to penetrate into the glaze, but only cover the surface of the custom mug manufacturers. Therefore, such baked flowers are not complete. When washing the cup or using the cup normally, the color will fade. Moreover, although the ceramic color agent retains the bright effect when baking flowers at low temperature, some chemical substances remain because the colorant is not completely volatilized, which will more or less affect people's health when using cups. So we put an end to the use of low-temperature floral paper to make our products.

In addition, colors such as purple and red can't be printed. Because in the process of printing purple red, the gold red agent and other ceramic color agents need to be fused and printed. When baking flowers, the golden red agent needs to be baked at a higher temperature, otherwise the color of the golden red agent can not be reflected, while the baking temperature of other ceramic colorants is much lower, which will cause a lot of color deviation.china mug suppliers

Finally, we suggest that when some colors can not be printed, we would rather choose to redesign the manuscript rather than use other methods to retain these colors.

Some colors can't be printed on ceramic coffee mugs from china manufacturers?

 From Xinxiang Ceramic Mug Manufacturers,As like as two peas, the ceramic mugs design was received yesterday, and the ceramic cups, which are exactly the same as the design draft, are made in the form of ceramic coffee mugs. The printed pattern is not complicated at all, but the pattern is rose red, which can not be made in the regular ceramic cup flower baking process

Come on. Later, I could only modify the production plan with the guests.

In fact, such things often happen. Many customers who don't often purchase custom ceramic coffee mugs will design a beautiful cup for the factory to make, but later, because the designed color can not be made, the design cost of customers is wasted.

Why can't some colors be made? I've seen how the pattern on the ceramic cup is printed .The friends of this post must have a certain understanding of ceramic cup printing. The colors printed on the ceramic cup are all made of ceramic clay

Color agents are different from those used in paper printing, so the color that can be printed on the paper cannot be finished on the ceramic cup, especially after the ceramic cup is pasted, the process of high-temperature flower baking will be completed, which will cause some colors to change color or change color when baking flowers at high temperature

In the end, it can not reach the original expectation.

On various materials of ceramic mugs---white porcelain mugs china suppliers

 From Xinxiang Ceramic Mug Manufacturers,Our common ceramic cups are mainly white porcelain and reinforced porcelain. Today, let's first share some of the ingredients of white porcelain and the furnace atmosphere during firing.

White porcelain mug suppliers is made of raw materials such as Pengyang porcelain powder, quartz powder, raw gangue powder, Mashan soil, cooked talc powder, mature gangue powder, feldspar powder, coal gangue and other raw materials in proportion. It is fired by reducing flame furnace atmosphere at 1300 ℃.

The transparent glaze above white porcelain is the main glaze, because the white porcelain itself is white, there is no need to add milk white glaze to increase its whiteness, and the problem of pinhole is easy to appear in the firing process of custom white porcelain mugs after milky white glaze.

However, there are many factories using opalescent glaze, at this time, we should pay attention to each drying step in the production process to strictly control, at this time, the best way to prevent pinholes. In addition, the use frequency of the mold should also be noted, generally a set of mold can only be used 35 times. quite a lot

In order to reduce the production cost, the factory even uses a set of molds for 50 times. In this way, the products are not only easy to appear pores, but also have obvious mold lines. This is a very irresponsible performance of product quality.

White porcelain mug wholesale is a kind of medium grade material. White porcelain cup is mostly used in domestic promotional gifts and export business, which is the best selling material in the market.

China ceramic manufacturers tells you: how to clean and maintain ceramic coffee cups

 From Xinxiang Ceramic Mugs Wholesale,The newly bought ceramic cup, no matter drinking tea or coffee, will have a lot of stains after a period of time. Cleaning the ceramic mug becomes a problem. Many people like their beautiful ceramic mugs and can't bear to wash the cups with hard things like cleaning balls, but they can't find a better way to remove the stains on them, so it's really depressing.

In fact, not every kind of cup is so delicate. Generally, our common cups are stoneware, white porcelain, reinforced porcelain and Bone China (please refer to my "talking about the material of customed ceramic mugs " for a paste). In addition to bone china, other cups of these materials can use cleaning balls, steel balls and other hard things to brush the stains on the cups. No matter it is white porcelain, stoneware or reinforced porcelain, the raw materials are pure clay, and the firing temperature is about 1200 degrees. Therefore, the cups of these three materials have strong hardness, which is enough to withstand the washing of cleaning balls, steel balls and other tools. Moreover, the cups of these three materials do not need any maintenance measures, as long as the cups are not broken and can be cleaned in time Dirt, the cup will always be as new.

But the bone china cup needs special care when cleaning. Because bone china is a kind of valuable material, this kind of material is mixed with animal bone powder (cattle and sheep bone powder) in the raw material of pottery. After two times of high-temperature plain firing and low-temperature glaze firing, it becomes a kind of porcelain with high whiteness, good transparency, fine porcelain quality and smooth glaze surface.

The bone china cup can not be cleaned with hard tools such as cleaning ball and steel ball, but should be wiped with a towel dipped in lemon juice or vinegar, and the hot cup can not be directly washed in cold water, which is easy to damage the cup. In addition, the cup in the ordinary use should also pay attention to maintenance, the need to pay attention to are: 1, absolutely can not be put into the microwave oven immediately hot; 2, can not use the dishwasher to clean; 3, use the pH value between 11-11.5 to clean the cup; 4, if the cup has scratches, you can use toothpaste to smear the scratched place, rub it by hand, which can play a repair effect.

Finally, I would like to share with you that most of the ceramic mugs suppliers,we are using are ordinary cups, so you don't have to use them very carefully. Of course, if it comes from a famous or very commemorative cup, it needs careful maintenance. Ceramics is an art, is the art of combining fire and soil, so patiently taking care of a few of my favorite porcelain is also a good life enjoyment.

Why are red ceramic mugs more expensive than other ceramic cups?

 From Xinxiang Ceramic Mugs Manufacturers,We often see ceramic cups of various colors, white, yellow, red and green. The cups of the same specification are more expensive than white ones, black ones are more expensive than yellow ones, and scarlet ones are more expensive than black ones. What's going on?

Why is the bright red ceramic cup more expensive than other ceramic cups?

The color on the ceramic cup is related to the glaze on the cup. What is glaze? Glaze is a kind of silicate. After the glaze is applied to the body of the ceramic cup and fired again, the glaze will become a smooth glassy layer. The slippery layer on the ceramic product is the product of glaze firing.

When grinding the glaze, we add yellow, black, blue and other corresponding ceramic color agent raw materials to make glaze. We call it color glaze. The cup fired by applying these glaze on the body of customized ceramic mugs is the mug with color.

White cups do not need to be ground with ceramic colorants, so the cost is the lowest. The reason why black cups are expensive is because cobalt oxide is added when grinding glaze, which is a more expensive chemical raw material. Therefore, black cups are more expensive than other cups.

Is it true that the bright red cup is also made of red ceramic pigment when grinding glaze?

Bright red, known as China red in our ceramic industry. China red glaze is a kind of ceramic glaze with rare metal tantalum as the main raw material. Because the Chinese red glaze is easy to decompose under high temperature conditions, it needs secondary glazing and low-temperature firing in the production process. Therefore, the process of China red glaze is to coat the finished ceramic cups with China red glaze, and then put it into the kiln for low-temperature baking, so as to complete the glazing process of low-temperature red glaze. That's why the bright red cup is more expensive than the other colors.China mug suppliers

How is the LOGO printed on the Christmas disney ceramic coffee mugs?

 From Xinxiang Ceramic Mug Manufacturers,Many customers will ask when they order Christmas disney ceramic coffee mugs to us: how are the patterns printed on the ceramic cups? Will the cup fade? Is it toxic?

First of all, I would like to be very responsible to say to you: all strictly in accordance with the ceramic mugs baking flower process products will not fade, not to mention toxic.

So how does the pattern on the ceramic cup make it? I'll tell you in detail.

The so-called ceramic mugs printing, in fact, is what people in the industry call "baked flowers". As the name implies, it is to bake the cup with high temperature and bake the pattern (pattern) into the cup.(china ceramic mug manufacturers)

There are several steps to complete a cup of baked flowers, the first step is printing paper. Generally speaking, floral paper is a very thin film, and in a professional sense it is called polyvinyl butyral film. On the film, the pattern to be made on the cup is printed on the film, which is the printing paper process and the premise of cup flower baking.

The paper is printed, and then there is the second step, decals. This step is very simple, is to paste the finished flower paper on the cup. However, we should pay attention to when pasting decal paper. The paper should be flat and completely pasted on the cup. There should be no bubbles in the middle, and the part printed with the pattern should not have wrinkles. Otherwise, the cup will easily explode (that is, the printed part will be blown out) when baking flowers at high temperature. But because the ceramic mugs is not a standard part, all the decals have to be pasted manually by the decal workers, which is why we may see ten cups with the same pattern arranged in a row, and the printed patterns are not in a straight line.

After the cup has finished the decal, the next step is to bake the flowers. This step is more simple. Put the cup pasted with floral paper into the kiln and bake it at high temperature. The key to baking flowers is temperature, which is restricted by the color of the paper and the material of the ceramic cup. That is to say, different colors need different temperatures to bake, so as to make better products. If the temperature is lower than the temperature required by the color, the printed pattern will have no luster and the color is not bright. If the temperature is higher than the temperature required by the color, the color of the printed pattern will become pale and white, even as if it is not printed. However, the material of the ceramic cup will also affect the temperature of the baked flower, because the temperature of the baked flower just makes the glaze on the ceramic cup begin to melt. At this time, the ceramic color agent on the flower paper will penetrate into the glaze. When the product cools down, the color and the ceramic cup become one, so as to achieve the purpose of the ceramic cup not to fade. If the baking temperature is too low and the glaze of the Christmas disney ceramic coffee mugs has not started to change, the printing color is only attached to the surface of the ceramic cup. If you wipe the pattern with a wet towel, the pattern will fall off.

The custom nestle ceramic coffee mugs completes the baking flower, also completes the entire process of printing pattern. However, it should be noted that whether it is the foil or the various pigments printed on the film, they are non-toxic and harmless. The flower paper film is called polyvinyl butyral film, which is made of butyraldehyde and alcohol. The colors printed on the film are ceramic pigments, that is, all kinds of earth, stone and so on.

Therefore, all strictly in accordance with the ceramic cup baked flower technology products, certainly will not fade, not to mention toxic.

Broken handle of ceramic tea mugs can repair it - china custom mug manufacturers

 From Xinxiang Ceramic Coffee Mug Manufacturers,Yesterday, a friend who knew a little about ceramic making technology called me and said that he had broken the handle of a meaningful ceramic cup at home and asked me if I could restore the handle. I said that there is no way to recover the broken part of the finished ceramic cup. She did not understand: "the handle and the body of the ceramic tea mugs are originally glued together?".

Yes, the handle and the body of the ceramic mugs are glued together. When making semi-finished products, the conventional cup body is made by machine pressing, and the handle can only be made by grouting. Therefore, when the cup body and handle are made of mud, the two should be pasted together with the mud of the same material as the cup body and handle (for the ceramic material, please refer to the material paste of the ceramic mug), and then After washing, glazing, and then firing, the body, handle and paste part of the cup are porcelain into one at the same time. This is the complete custom ceramic mugs we see.

However, the porcelain mugs supplier that has been fired and porcelain can not be pasted, because the mud that can play a bonding role in the firing process can not be combined with the porcelain product again.

Material of ceramic coffee mugs from china custom porcelain mugs manufacturers

 From Xinxiang Ceramic Mug Manufacturers,Generally speaking, the material of ceramic mugs has bone china, magnesium strengthening porcelain, white porcelain, stoneware. Our most common custom ceramic coffee mugs is mainly made of white porcelain and reinforced porcelain.

Fine Bone china mugs china is a raw material containing cattle and sheep bone powder, fired products have good transparency, the product glaze is delicate, the product is light green. Bone china is a high-grade material.

Strengthening porcelain is a kind of medium and high-grade material second only to bone china. Its main raw materials are talcum powder and feldspar powder, which are fired in an oxidizing atmosphere at 1350 degree. The product is suitable for large temperature difference (between - 20 degree - 240 degree), small deformation, high bending strength (220MPa), good thermal stability and wide firing temperature range (40 degree). The glaze is a frit glaze with high gloss and good transparency, which makes the product have high whiteness, strong hardness, fine glaze surface and good transparency.

The main raw materials of white porcelain are kaolin, Pengyang porcelain stone powder and so on. The firing temperature is 1300 degree. The main glaze is transparent glaze. The whiteness of the product is 88.1 degree, which belongs to the medium grade material(http://www.customceramicmug.com/).

The main raw materials of stoneware are quartz powder, Mashan soil, etc. the firing temperature is between 1180 degree and 1270 degree. The main glaze is milky white glaze or color glaze, which belongs to medium grade material.They are all of the Material of ceramic coffee mug manufacturers.

Maintenance of fine bone china coffee mugs china manufacturers

 From Xinxiang Ceramic Mug Manufacturers,Fine Bone china coffee mug and tea cup originated in China. It belongs to high-grade porcelain, used for people with quality life.

Fine Bone china coffee cup, compared with the general traditional porcelain, has a high texture, good transparency, can present elegant, bright and clean, jade like texture, permeate a noble temperament, so we must do a good job in the maintenance of bone china tableware, so as to maintain its beautiful and moving characteristics.

The general maintenance methods of fine bone china mugs are as follows:

1. When the surface of bone china cup is stained with oil, it can be cleaned with warm water with the water temperature below 80 ; if it is not easy to clean, it can be cleaned with a little vinegar and water, and detergent is not available

2. If there is scratch on the surface of bone china cup, it can be polished gently with toothpaste; when cleaning with wet cloth or hand, it should be careful to use light force, not too large, to avoid scratching porcelain

3. If the fine bone china tea mugs purchased is available without mark microwave oven, do not put it into microwave oven for heating, otherwise it will corrode Phnom Penh

4. Do not immerse the heated bone china coffee cup directly in cold water, so as not to damage the porcelain quality due to the rapid change of temperature

As long as we master the maintenance method of bone china cup, we can keep its white color and delicate touch. When we are at a party or a feast, we can use these well maintained tableware to hold food, which will give people enough grace and show extraordinary style.

Characteristics and selection of ceramic coffee mugs

 From Xinxiang Ceramic Mug Manufacturers:

Characteristics of ceramic coffee mugs

Ceramic coffee cups is not rusty, rotten, water-absorbing, hard and smooth, easy to wash, with the advantages that other tableware can't match, but the lead in ceramics is also an unavoidable problem of thousands of years of manufacturing technology. Over the years, the relevant spot check of the national quality supervision department also shows that the excessive lead dissolution has become a common problem of ceramic cups.

Ceramic coffee mugs selection

When choosing custom ceramic mugs, we should pay attention to choose the tableware with small decoration area or safe underglaze color or underglaze color, and do not choose the tableware with very bright color and inner wall with color decoration. For glaze colored porcelain, it is easy to use visual inspection and hand touch to identify. Anyone whose picture is not as bright as glaze, whose hand feel is not smooth, or whose picture edge has a raised feeling, should be careful to buy. In addition, consumers should not plan to buy ceramic products on the ground stall cheaply. If economic conditions allow, they can also choose lead-free glaze green tableware. Before using the newly purchased ceramic coffee cup, it can be soaked in vinegar to melt most of the lead. When using, do not use the colored ceramic tableware to hold the acid food.

When choosing ceramic coffee cups, many people may mainly focus on the design and color, but they don't know that the one who chooses the underglaze color or the underglaze color is healthy, safe, and the quality is good.

Category and introduction of ceramic glaze for ceramic mugs (1)

 From Xinxiang Ceramic Mug Manufacturers,Ceramic pigment, also known as pigment or pigment, is a kind of decorative material for powdery colored ceramics, which is composed of color base, flux or additive. The color base is a kind of inorganic coloring material for ceramics, which is made by the combination of the colorant (the material that can make the ceramic body, glaze and so on) and other specific raw materials (such as kaolin, quartz, feldspar, alumina, etc.) through calcination, grinding, rinsing, drying and grinding. Flux is silicate, borate or alkali silicate glass containing lead. It is a low melting point glassy substance that promotes the combination of ceramic color base and ceramic ware surface. The pigment is a kind of crystalline solid powder, which is made by mixing chromogenic ion and matrix material as crystal structure, reacting under proper firing conditions, particle size control, sieving, rinsing, blending and homogenization.

(Custom ceramic mugs)Ceramic color materials include color materials for building ceramic body, color materials for building ceramic glaze, dry mixed color materials, roller color materials, wrapped color materials, color materials for daily use porcelain and sanitary porcelain glaze, etc. The industrial production of ceramic pigment products has the following characteristics: color powder stability under high temperature application conditions; 1. Color stability of pigment products; 2. Wide range of color phase conditions; and the best color intensity conditions. Therefore, it is required that ceramic color products can be widely used in glaze, in glaze, under glaze, green body and other color decoration.

Ceramic pigment has the following uses: green body coloring. The coloring substance (colorant) in the color stock is mixed with the blank to make the burned blank appear certain color. The colored mud can be used to make furnishing porcelain, daily utensils and building wall and floor tiles. White mud can also be used as underglaze coating (make-up soil) to cover the color of green body. 1. Coloring of glaze. Color agent and basic glaze can be mixed into various color glaze and art glaze. 2. Draw patterns. It is widely used on glaze surface and under glaze for manual painting, as well as for decal paper, screen printing, transfer printing and spray painting.

What kind of ceramic coffee cup for coffee(2) color and capacity

 From Xinxiang Ceramic Mugs Manufacturers,There are three sizes of coffee cups:Small coffee cup (60ml ~ 80ml) - it is suitable for tasting pure and high-quality coffee or strong single coffee. Although it can be drunk almost at one sip, the lingering fragrance and aftertaste show the most exquisite flavor of coffee.

Regular coffee cup (120ml ~ 140ml) - common coffee cup. Generally, when drinking coffee, you should choose such cup more often. There is enough space for you to mix and add milk powder and sugar.

Mug or French milk coffee cup (more than 300ml) - it is suitable for coffee with a large amount of milk. For example, American Mocha multi-purpose mug can contain its sweet and diverse taste. The romantic French, on the other hand, are accustomed to using a large bowl of milk coffee (O'rei coffee) to make up the happy mood that lasts all morning.

custom ceramic coffee cups: color

The color of coffee is clear amber. In order to show this feature, it is better to use a white coffee cup in the cup. Although some coffee cups are painted with various colors or even detailed patterns to make the cup look good when placed, it often affects the recognition of coffee brewing completion and quality by the color of coffee.

Jinan Xin Xiang Ceramic Mugs Industries

What kind of ceramic coffee mugs for coffee

 From Xinxiang Ceramic Mug Manufacturers,In recent years, under the concept that coffee must be drunk hot, cup makers even match this kind of stress to develop ceramic cup with heat preservation effect, or even better bone china cup than porcelain cup. Using bone china cup with animal ashes in this texture can slow down the temperature of coffee in the cup. But because its price is much more expensive than the former two, it is rarely used in general families and can only be seen in the more exquisite coffee shop. To a certain extent, it highlights certain advantages. With the development of the times, their size, color and style are also changing and maturing, attracting more and more people to understand and appreciate it. It can be said that ceramic coffee cup has its own life.

The simplicity of the custom ceramic coffee mugs and the mellowness of the porcelain cup respectively mark different coffee attitudes.

Ceramic cup: it has a thick texture and is suitable for deep roasted and full-bodied coffee.

Porcelain cup: the most common, can just explain the delicate flavor of coffee. Among them, the coffee cup made of high-grade porcelain clay and animal bone powder is light in texture, soft in color, high in density and good in heat preservation, which can make the coffee lower in temperature more slowly. It is the best choice to show the coffee flavor.

The material of 14oz white ceramic coffee mugs

 From Xinxiang Ceramic Mugs Manufacturers,The beautiful pattern of 14oz white ceramic coffee cup is glaze color, and the method of glaze color determines the safety of ceramic tableware. Glaze is divided into overglaze color, underglaze color and underglaze color, and only overglaze color is not safe.

The resolution method is very simple, the surface is smooth, such as the amount of lead and cadmium dissolved in the glaze and underglaze color ceramics of glass is very little or almost no, so you can buy it at ease; and for the surface of the glaze color products with concave convex feeling, you should try to choose the products with less surface decoration patterns. Secondly, if the overglaze color ceramic is touched by hand, the surface of the product has concave and convex feeling, and the height is uneven when observed by naked eyes; if the underglaze color ceramic and the underglaze color ceramic touch the surface of the product by hand, it is smooth as glass, without the feeling of uneven. Among them, most of the glaze color and underglaze color porcelain can be purchased at ease; and if inferior pigments are used in the processing of the glaze color porcelain, it is easy to lead to excessive dissolution of lead and cadmium. If you buy a product that you don't trust, soak it in vinegar for a few hours. If you find that there is a significant change in color, you should discard it. In addition, the raw material soil of ceramic firing is different in mineral content due to different producing areas, while the soil with high content of silicon and mercury is not suitable for cooking tableware.

Consumers should pay attention to whether the pattern color is bright when choosing the glaze color products. If not, the amount of lead and cadmium dissolved is often high. Don't be greedy to buy three no ceramics on the street. It's hard to guarantee the safety of 14oz white ceramic coffee mugs on the street, because it has no brand and production standard at all. If economic conditions permit, we should also choose the lead-free glaze "green" tableware which is more expensive than ordinary ceramic tableware, which can be bought in supermarkets. For example, Bone China is recognized as a high-grade porcelain in the world. Its high calcium oxide content is due to the selection of animal bone powder as one of the raw materials. White porcelain bone china does not contain lead, cadmium, and the picture is not easy to wear. It is also suitable for the use of microwave oven. It is worthy of "green" ceramics.

Harm of cadmium and lead in ceramic coffee mugs china

 From Xinxiang Ceramic Mug Manufacturers,Ceramic coffee cup, as we all know, the traditional concept of ceramics refers to all the artificial industrial products with clay and other inorganic non-metallic minerals as raw materials. It includes various products made of clay or mixture containing clay through mixing, forming and calcining, which are called ceramics.

Ceramic coffee mugs has become the first choice of tableware for many families because of its smooth color, bright color and exquisite design. But few people know that in order to ensure bright colors in the production process of ceramic cups, lead, mercury, radium, cadmium and other harmful heavy metal elements are usually added to the colored glaze.

However, if milk and other foods containing organic acid are placed in custom ceramic coffee cups with heavy metal exceeding the standard, the toxic substances in the ceramic cup will be released and enter the human body together with the food, causing chronic poisoning, in which cadmium and lead may cause liver or other internal organs poisoning, mercury may cause liver and kidney hardening, and radium may kill white blood cells. In addition, in addition to the colored porcelain, the white porcelain without colored glaze may also have excessive heavy metals. If the clay used to make the porcelain is unqualified, lead poisoning and other diseases may be caused.

Therefore, when purchasing ceramic cups, we should carefully observe whether the inner wall of tableware is smooth and clean, and use nails to scrape. If there is a pattern on the ceramic cup and the part without a pattern has different refraction light, the two parts have different handfeel, and the glaze color can be scraped off with nails, it is likely that the inferior products with excessive heavy metal can not be used to hold food. At the same time, in order to ensure safety, the ceramic tableware should be boiled for 5 minutes before use, or soaked in vinegar for 2-3 hours to dissolve the harmful substances in the customed ceramic tablewares. In addition, white porcelain should be soaked in white vinegar, and colored porcelain should not be heated in microwave oven. Why the color porcelain should not be heated in the microwave oven, because the color painting on the inner wall of the color tableware is bright, but the color glaze contains lead, mercury, cadmium and other heavy metal elements. Among them, cadmium and lead are easy to cause liver or other visceral poisoning, while Mercury can cause liver and kidney sclerosis. The more the glaze color of the ceramic cup, the brighter the color, the more lead, cadmium and other compounds.

It is understood that in the production process of ceramic cup, lead is added to the glaze and lead and cadmium are added to the pigment, which can make the glaze uniform and bright. However, there are serious defects in the raw materials and processes of some small ceramic production workshops. In order to pursue low cost, the physical and chemical indexes of daily ceramic products, especially the indexes of lead and cadmium, often do not meet the product quality and safety standards.

Therefore, the industrial and commercial personnel remind consumers: when purchasing ceramic products, they should pay attention to whether the pattern color is bright. If it is not bright, it may be that the temperature does not meet the requirements when baking flowers, and the amount of lead and cadmium dissolved in such ceramic products is often high. Especially those ceramic tableware that can wipe off the pattern by hand, it is better not to buy.

Glazed technology of custom ceramic coffee mugs china

From Xinxiang Ceramic Mugs Manufacturers,To judge whether the ceramic tableware contains toxic substances, it is necessary to distinguish which kind of ceramic coffee cup is used: underglaze color, underglaze color and overglaze color.

How to distinguish overglaze color, in glaze color and underglaze color?

Generally speaking, ceramic tableware is toxic, which belongs to the category of glaze color. Because the patterns or patterns on the glaze color tableware can be scraped off with a knife, or even soluble in water, and the pigments used to make patterns or patterns are toxic.

OK, there's a problem. If the patterns or patterns on the tableware are on the surface of the tableware, those that can be scraped off with a knife or sharp tool are likely to eat toxic substances in the process of use.

So when people choose custom ceramic coffee cups factory, they should be optimistic. Don't buy glaze colored tableware. Don't be attracted by its low price. You need to know that health is priceless and can't be bought by money. It's good to spend more money to buy health and rest assured. You just choose underglaze or underglaze.

How to judge the quality of ceramic coffee mugs by watching and listening

From Xinxiang Ceramic Mugs Manufacturers,How to judge the quality of ceramic coffee mugs by watching and listening.

In daily life, we deal with ceramic tableware every day, so how to identify the quality of ceramic coffee cup? The two most important keys to distinguish ceramic tableware are "look" and "listen".

1. "Look" is to observe the inside and outside of the ceramic coffee cups carefully. First, check whether the glaze of porcelain is smooth and smooth, and whether there is scratch, small hole, black spot and bubble; second, check whether the shape is regular, and whether there is deformation; third, check whether the picture is intact; fourth, check whether the bottom is flat, and must be placed stably, without burr.



2. "Listen" is to listen to the sound when you gently tap the ceramic coffee mugs. If the sound is clear and melodious, it means that the porcelain body is fine and dense without crack damage. When it is fired at high temperature, the porcelain is complete. If the voice is dumb and dull, it can be concluded that the porcelain body is cracked or incomplete. This kind of porcelain is easy to crack after cold and hot changes.



In addition, do not buy Ceramic tableware with too bright colors. In order to make the color bright, the manufacturer will add some heavy metal additives to the glaze color. Therefore, the brighter the color of the tableware, the more likely the heavy metal will exceed the standard. Long time use of such tableware will cause chronic poisoning.



Recently, I saw a lot of people saying bad things about custom ceramic coffee mugs  on the Internet, saying that ceramic tableware is not good and contains toxic substances, which should be used as little as possible or not. I think people who say these words are all idiots and lack of common sense. People in the United States and Europe regard ceramic tableware as a symbol of family life, but some people here don't understand anything and say that ceramic tableware is poisonous. They are really angry.

Six disinfection methods of ceramic coffee mugs cups and tableware

From Xinxiang Ceramic Mug Manufacturers,

1) Cleaning method

1. Scrape off most of the food residue and dirt on the surface of the ceramic mugs.
2. Wash the surface of tableware with detergent solution.
3. Finally, rinse off the residual detergent with clear water.



2) Disinfection method

1. Keep boiling and steam sterilization at 100  for more than 10 minutes.
2. The disinfectant containing chlorine shall be used for disinfection. The concentration of disinfectant shall contain more than 250mg / L of effective chlorine (also called 250PPM). All catering utensils shall be immersed in the liquid for more than 5min.
3. After chemical disinfection, the tableware shall be washed with clean water to remove the residual disinfectant on the surface.

3) Cleaning methods

1. The sterilized ceramic dining utensils should be naturally filtered or dried, and should not be dried with towels or napkins to avoid re pollution.
2. The sterilized ceramic coffee mugs factory should be put into a container that can prevent dust and flies in time.



4) Common disinfectants

1. Bleaching powder: mainly composed of sodium hypochlorite, calcium hydroxide, calcium oxide, calcium chloride, etc. When preparing water solution, add a small amount of water and paste it into a paste. Then add water edge to add the emulsion, then settle the precipitate and use the clear liquid. Bleach available
Soak and disinfect the environment, operation platform, equipment, catering equipment, tools and hands.
2. Calcium hypochlorite (bleaching powder): it is fully dissolved in water during use. Ordinary tablets should be milled and added into water for full stirring and dissolution. Effervescent tablets can be directly added for dissolution. Use the same as bleaching powder.
3. Sodium hypochlorite: fully mix in water when using. Use the same as bleaching powder.
4. Sodium dichloroisocyanurate (euclozin): when used, it is fully dissolved in water. Ordinary tablets should be milled and added into water to be fully stirred for dissolution. Effervescent tablets can be directly added for dissolution. Use the same as bleaching powder.
5. Chlorine dioxide: due to the instability of the prepared aqueous solution, activator should be added before use. Use the same as bleaching powder. Due to the strong oxidation, it is necessary to avoid contact with grease to prevent its oxidation from accelerating.
6. Iodophor: 0.3-0.5% Iodophor can be used for hand immersion disinfection.
7. Clean and sterilize: 0.1% clean and sterilize can be used for hand immersion disinfection.
8. Ethanol: 75% ethanol can be used for hand or operation platform, equipment and tools.



5) Example of preparation method of disinfectant

For example, 1 l of disinfectant with effective chlorine concentration of 250mg / l was prepared from each bleaching powder concentrate containing 0.25g of effective chlorine

1. Mark 1L scale line in the special disinfection container in advance.
2. Fill the container with water to the full scale.
3. Grind 1 piece of bleaching powder and add it into the water.
4. Stir until the tablet is fully dissolved.



6) Precautions for chemical disinfection

1. The disinfectant used shall be stored within the shelf life and in accordance with the specified temperature and other conditions.
2. The preparation shall be carried out in strict accordance with the specified concentration, and the solid disinfectant shall be fully dissolved.
3. The prepared disinfectant should be replaced regularly, usually every 4 hours.
4. Measure the concentration of disinfectant regularly when using, and replace it immediately if the concentration is lower than the requirement.
5. Ensure the disinfection time. Generally, custom ceramic tableware and tools should be disinfected for more than 5min.
6. The disinfectant should be completely immersed in the disinfectant.
7. The ceramic cup should be cleaned before disinfection to avoid the influence of oil scale on the disinfection effect.
8. After disinfection, wash the disinfectant with clean water.

Healthy use of color glazed ceramic coffee cups and tableware from china manufacturers

From Xinxiang Ceramic Mugs Manufacturers,Paper cup: the outer layer is mostly attached with plastic film or wax. It is not suitable to hold the food just out of the pot.

Ceramic cup: ceramic cup, health and threat coexist

Ceramic mugs custom is one of the tableware that almost every family will use. Although ceramic tableware is relatively safe, the lead content in ceramics is inevitable in the manufacturing process. In addition, it may contain cadmium, mercury, radium and other elements. In the long-term and improper use, it is easy to cause chronic poisoning. Cadmium damages the kidney greatly and accumulates in the bone, which leads to the decrease of human immunity, joint deformation and pain.

Purchase and safe use: lead, cadmium and other elements in ceramic tableware mainly lie in glaze color. However, glaze color porcelain is easy to be identified by visual inspection and hand touch. If the picture is not as bright as glaze, the hand feel is not smooth or even the edge of the picture is convex, you should be careful. The newly purchased ceramic cup can be boiled in boiling water for 5 minutes before use, or soaked in vinegar to release most toxic substances. When using, do not use colored ceramic tableware to contain acid food.

Enamel cup: contains lead compounds such as lead silicate, which will be harmful to human body if not processed well. To buy enamel tableware, we should choose high quality products with exquisite workmanship.

Plastic cup: containing carcinogens of vinyl chloride, long-term use can cause cancer.

Glass: sometimes "moldy", with soap and other alkaline substances can be removed after washing.

Aluminum cup: Aluminum accumulates too much in human body, which will cause arteriosclerosis, osteoporosis, dementia, etc. Therefore, it should be noted not to use a rice shovel to scrape the aluminum pot. In addition, it is not suitable for long-term storage of food and long-term storage of salty food.

Copper Cup: after rusting, it will produce "copper green", i.e. copper carbonate and blue alum, which are harmful substances, which can cause nausea, vomiting and even serious poisoning accidents.

The knowledge of fine porcelain ceramic coffee mugs

From Xinxiang Ceramic Mug Manufacturers,The texture of ceramics is not as delicate as that of other porcelain, but it also makes ceramics popular with many designers. It is used to express the leisure style or traditional cultural charm.

So the key point of selection is: to see whether its utensils are out of shape, and then whether the painting process is fine.

Choice of strengthening porcelain

Mainly to see if the utensils are deformed; Bone China purchase: one heft, two look, three listen and four lift. One is to weigh the weight in your hand to see whether it is moderate; two is to see whether the glaze is mirror like and glossy, whether the color is soft, whether there is a feeling of jade, and whether the color of the picture is bright; three is to listen to whether the sound is as clear as gold stone if you tap with hard objects; four is to lift the porcelain to the light source to see its semi transparency and good bone china Transparency is high.

It should be reminded that due to the lead content in ceramic mugs, poor tableware will cause harm to human body in long-term use, so in addition to not greedy for cheap in the roadside or on the stall to buy. In the normal use process, there are also some points to pay attention to:

Before using the newly purchased tableware, it can be soaked in edible vinegar to dissolve most of the lead; in the process of using, do not use colored fine porcelain custom ceramic coffee mugs to contain acid food, so as to avoid chemical reaction; do not put the utensils with metal decorative lines and patterns in the microwave oven; when washing, add detergent with warm water, wipe with sponge or soft cloth, and then clean with clear water, Then use soft towel to wipe clean, do not use rough brush or cleaning cloth to brush, to avoid damaging the glaze of the tableware and producing scratches.

With the above knowledge you no longer for how to choose satisfactory tableware and worry about it.

Material advantages of ceramic tableware manufacturers

From Xinxiang Ceramic Mug Manufacturers,At present, the tableware materials in the market can be roughly divided into: ceramic products, bone china products, reinforced glass ceramics, reinforced porcelain, white porcelain, crystal, glass, etc.

Tableware category

(1)  ceramics. The main ingredients are made of clay, brown or gray in color, thick and loose in texture, easy to be damaged, but rich in historical and cultural heritage. Main products: Chinese style, Japanese style teapot or tea set; suitable for people: like to taste tea or pay attention to taste life market price: large span.

(2) bone china products. According to the British bone china standard, at least 30% of tricalcium phosphate from animal bones should be contained, and the finished product has light transmittance, which is called bone china coffee mugs.

The quality of Bone China is advanced. Compared with the general traditional porcelain, Bone China has good transparency and can present elegant, bright and clean texture, such as jade. In addition, Bone China has the characteristics of high plasticity, smooth glaze color, gorgeous painting, hard and durable texture, etc. Main products: complete set of bone china tableware, Bone China Mug; suitable for people: complete set of bone china tableware is most suitable for the reunion of relatives and friends, family drinks, and can also be used as a gift for the newlyweds and housewarming of relatives and friends; market price: complete set of Bone China tableware is high-end tableware, general the price is high.

(3) strengthen glazed porcelain. It is made of kaolin and silica. It is hard and light, and it is not easy to be damaged after being strengthened at a high temperature of more than 1250. It has double characteristics of strengthening glass and strengthening porcelain. Main products: coffee to cup; suitable for people: suitable for young people crowd; market price: the market price is generally high.

(4) Reinforced porcelain. It is composed of magnesium and has the characteristics of high strength, acid and alkali resistance, lead-free toxicity, and not easy to damage. Main products: General tableware; suitable for people: it is an ideal product for all kinds of families. Market price: moderate.

(5) White porcelain ceramic mug. The same high-temperature porcelain, the most common porcelain, is relatively easy to damage. Main products: general household tableware, such as mugs, etc.; suitable for people: ordinary family. Market price: lower.

(6) crystal products. Crystal is a silicon oxide compound, which contains lead oxide, potassium carbonate, potassium nitrate, arsenic and so on, which are produced by different manufacturers or with different formulas.

Crystal products are relatively easy to break. Main products: high-end ornament works of art, wine utensils, fruit plates, etc.; suitable for people: those who pursue higher living standards; market price: usually higher.

(7) glass products. Glass products are also silicon oxide compounds. Although there is no crystal products, they are also clear and natural. Glass products are as fragile as crystal. Main products: all kinds of cups or vases, etc.; suitable for people: general home court; market price: cheaper.

(8) Heat resistant glass products. Heat resistant glass products are based on glass products, adding heat-resistant materials. Main products: teapots, etc.; suitable for people: ordinary families; market price: middle class.

How to choose Custom ceramic coffee cups manufacturers

From Xinxiang Ceramic Mug Manufacturers,Ceramic coffee cup has various shapes, delicate and smooth, bright colors and is easy to clean. However, lead, mercury, radium, cadmium and other elements in colored glaze are harmful to the body.

The ceramic cup has various shapes, delicate and smooth, bright colors and is easy to clean. However, lead, mercury, radium, cadmium and other elements in colored glaze are harmful to the body. Therefore, when purchasing and using ceramic tableware, we should pay attention to the following points:

1. To buy custom ceramic coffee cups, we must choose a regular market. We must not buy inferior products without formal manufacturers at a low price. According to national regulations, when ceramic tableware is immersed in 4% acetic acid, the dissolution of Lead shall not be more than 7 mg / L, and that of cadmium shall not be more than 0.5 mg / L.

2. Pay attention to the appearance of tableware when purchasing. Touch the surface of tableware by hand to see if the inner wall is smooth;

3. Smell whether there is peculiar smell;

4. Don't buy Ceramic tableware with too bright colors. In general, the brighter the color of ceramic cup, the more likely heavy metals will exceed the standard;

5. Should buy raw materials, process control more strict in glaze color, under glaze color tableware;

6. Before using the tableware, boil it in boiling water for 5 minutes or soak it in vinegar for 2-3 minutes to dissolve the toxic substances.

Purple sand to glaze color of 14oz balck Ceramic coffee mugs

From Xinxiang Ceramic Mugs Manufacturers,Some ceramic coffee cups are harmful to human health because they are decorated with glaze colors. There are some harmful metals in glaze color, such as lead, which can affect the function of blood, nerve, kidney, blood vessel and other organs. When the human body ingests a certain amount of lead, it will appear vomiting, nausea, abdominal pain and other symptoms.

Therefore, the following problems should be paid attention to when using ceramic cup:

1. When choosing ceramic coffee mugs factory, do not choose the one decorated with glaze color, especially the inner wall of ceramic tableware should not be painted. You can choose underglaze color or underglaze color decoration, such as blue and white is a kind of ceramics that people like to decorate with underglaze color.

2. The purchased ceramic cup is first soaked and boiled with water containing 4 vinegar, which can remove most of the toxic substances and greatly reduce the potential harm of ceramic tableware to human body.

3. Do not use ceramic tableware to store acid food, juice, wine, coffee and other drinks for a long time. Because the longer the ceramic tableware contains acid food or drink, the higher the temperature, the easier it is to dissolve lead, which is equal to aggravating the toxic and side effects of lead dissolution.

Removing toxic substances with vinegar in ceramic mugs

From Xinxiang Ceramic Mug Manufacturers,Entering the supermarket, the porcelain cups with different colors and designs on the shelves will attract many people's attention. But when people buy, they only look at its beautiful appearance and bright colors, but ignore the health risks.



"Heavy metals are responsible for the health hazards of porcelain cups." Dong Jinshi, vice president of the International Food Packaging Association, pointed out that in the production process, there are three kinds of porcelain cups: overglaze color, underglaze color and underglaze color. The overglaze color is the overglaze color, that is, it is baked after the white porcelain surface is pasted with decal paper. The underglaze color is the underglaze color, the color is covered by the glaze layer, and the underglaze color is a mixture of colors. Because of the harmful metals such as lead and cadmium contained in the color glaze pigment, the production cost of the overglaze color is lower and the underglaze color is safer. The tableware made by long-term use of glaze color technology contains food with high content of organic acids such as vinegar and vegetables. Heavy metals will enter the human body together, which will cause chronic heavy metal poisoning, immune decline and blood system diseases over time.

Dong Jinshi reminded us that when purchasing ceramic coffee cups custom, first of all, we should pay attention to whether the name of the factory and the executive standard are marked on the tableware; second, we should touch the inner wall with our hands to see whether it is smooth and clean, whether there are cracks, convex and concave inequalities; in addition, we should smell whether there is a peculiar smell. It should be noted that do not choose the tableware with bright colors and deep colors, and do not buy the tableware with flowers.



After buying back the ceramic coffee mug factory, it is suggested to boil the tableware with boiling water for 5 minutes first. Boiling water can play a role in sterilization, and then soak it in the vinegar at normal temperature for 1-2 hours, because some toxic substances will be separated out when the ceramic encounters acid substances. For the tableware that is not reassured, it can be soaked in vinegar for several hours. If it is found that the color changes obviously, it should be discarded.



When cleaning ceramic tableware, soft dishcloth shall be used, while Baijie cloth, decontamination powder, etc. are easy to scratch the tableware surface, which is more susceptible to pollution, so it is better not to use them. At the same time, try not to put acid, oil and alkaline food in the use for a long time, especially do not put the porcelain tableware containing more oil in the microwave oven to heat, in order to prevent the release of toxic substances. If you want to put it in the microwave oven, you should avoid metal decoration, such as porcelain tableware with gold edge, silver edge or inlaid pattern with gold paper, metal wire and metal wire.

Disadvantages of children's colored ceramic mugs

From Xinxiang Ceramic Mugs Manufacturers,Nowadays, all kinds of cutlery with delicate and beautiful shapes have become the new favorite in the home. They undertake a dual task: not only food tools, but also a part of family decoration. These beautiful children's ceramic cups are easy to attract children's attention because of their beautiful shapes, bright colors, and not easy to fall, and because it is convenient for parents to train children to eat consciously, they are often the first choice for parents to choose tableware for their children.

However, many parents may not realize that color tableware may threaten children's health. Xinxiang ceramic manufactur reminds us that a wide variety of beautiful tableware has different qualities, and many fake and inferior products are mixed, which may cause harm to our health.

The author visited several supermarkets in Shandong Province and found that there are mainly the following types of children's tableware: porcelain like tableware with smooth texture, various designs and colors, light and non fragile, ceramic like feel; plastic tableware with fresh color, beautiful flower shape and relatively cheap price; stainless steel tableware that is easy to clean and not deformed or deteriorated in case of heat; natural, non antiseptic and non painting materials Wood cutlery. According to the supermarket staff, brightly colored tableware is in line with children's psychology. Most parents are willing to use children's tableware with patterns to attract children to eat. Among these kinds of tableware, plastic tableware is the brightest, most beautiful and the best selling one on the shelf.

At present, plastic tableware, imitation porcelain tableware and some bright ceramic tableware factory are sold on the market. In order to improve the texture, light sense and high temperature resistance, some composite organic materials are added to their production process. In order to attract children, children's tableware is coated with many color patterns. These colorful tableware are not conducive to human health. Children's long-term use may lead to excessive lead content in the body and affect intellectual development. Therefore, when choosing tableware for children, it is better to choose quality tableware with simple appearance, colorless and transparent or light color.

For children's ceramic cups with different materials, how should parents use them reasonably so as not to pose a threat to their children's health? According to experts, porcelain like tableware is not suitable for high temperature cooking and cannot be used for microwave cooking. Try not to put acid, oily and alkaline food for a long time. Before using ceramic tableware, boil it with boiling water for 5 minutes or soak it in vinegar for 2-3 hours to dissolve the harmful substances in the ceramic tableware. Stainless steel tableware cannot be heated by microwave. The best way to disinfect is to use heat Boiled or steamed at high temperature; traditional wooden tableware should be made of vegetable wood, persimmon, apple, pear and other materials. As wooden tableware is easy to dry, it is recommended to wash it frequently to keep it moist.

Printing technology and material of ceramic mugs

From Xinxiang Ceramic coffee Mugs Manufacturers,When the lead brown glaze printed character pattern ceramic flat bottles of the Northern Dynasty were unearthed, when the modern home decoration ceramic tile printing patterns emerged in endlessly, when the ceramic tableware "bloomed" with the printing, the wheel of history rolled forward, time washed away too many memories, I don't know when there was a "first intimate contact", but the "encounter" between the printing and the ceramic was destined to start from a distant Dynasty and go all the way To the perfect fit.

Looking back in the dim light, I exclaimed, "printing and custom ceramic coffee cups have a wonderful date that spans time and space!" Whether it's printing stickers, transfer printing or digital ink-jet technology, the "encounter" between ceramics and printing will always bring an unexpected beauty to life.

Selection guide of personalised stoneware coffee mugs

From Xinxiang Ceramic Mug Manufacturers,When purchasing and using ceramic tableware, pay attention to the following points:

1) Pay attention to the appearance of tableware when purchasing. Touch the surface of tableware by hand to see if the inner wall is smooth;

2) Don't buy personalised stoneware coffee mugs with too bright colors. In order to make the color bright, manufacturers will add some heavy metal additives to the glaze color. Therefore, the brighter the color of tableware, the more likely heavy metal will exceed the standard;

3) Should buy raw materials, process control more strict in glaze color, under glaze color tableware. The underglaze colorful tableware in Liling, Hunan Province is the most distinctive. Zibo, Shandong Province, is famous for its original under glaze multicolored porcelain. The tableware porcelain is delicate, the glaze color is white as jade, and all the patterns are drawn by hand. It has become an important production area of national arts and crafts porcelain and high-grade household porcelain. Liling's underglaze multicolored porcelain is known as "national porcelain" for its special status, which shows its unique artistic value and status. The firing temperature of the product is 1400, under high temperature, so that the product does not contain lead, cadmium and other heavy metals, which belongs to the absolute environmental protection porcelain.

Harmful heavy metals in custom ceramic coffee mugs factory

From Xinxiang Ceramic Mug Manufacturers,Entering the supermarket, the ceramic cups with different colors and designs on the shelves will attract many people's attention. But when people buy, they only look at its beautiful appearance and bright colors, but ignore the health risks.


Heavy metals are the main cause of the harm to health of ceramic cups. Dong Jinshi, vice president of the International Food Packaging Association, pointed out in an interview with the life times that in the production process, porcelain tableware can be divided into three types: overglaze color, in glaze color and under glaze color. The overglaze color is the overglaze color, that is, it is baked after the white porcelain surface is pasted with decal paper. The underglaze color is the underglaze color, the color is covered by the glaze layer, and the underglaze color is a mixture of colors. Because of the harmful metals such as lead and cadmium contained in the color glaze pigment, the production cost of the overglaze color is lower and the underglaze color is safer. The tableware made by long-term use of glaze color technology contains food with high content of organic acids such as vinegar and vegetables. Heavy metals will enter the human body together, which will cause chronic heavy metal poisoning, immune decline and blood system diseases over time.

Xinxiang ceramics reminds you that when you buy ceramic coffee cups factory, you should first pay attention to whether the name of the factory and the Executive Standards are marked on the tableware; secondly, you should touch the inner wall with your hands to see whether it is smooth and clean, whether there are cracks, convex and concave inequalities; in addition, you should smell whether there is peculiar smell. It should be noted that do not choose the tableware with bright colors and deep colors, and do not buy the tableware with flowers.

After buying back the porcelain tableware, it is suggested to boil the tableware for 5 minutes first, the boiled water can play the role of sterilization, and then immerse it in the vinegar at normal temperature for 1-2 hours, because some toxic substances will be separated out when the ceramics encounter acid substances. For the tableware that is not reassured, it can be soaked in vinegar for several hours. If it is found that the color changes obviously, it should be discarded.

When cleaning custom ceramic tableware, soft dishcloth shall be used, while Baijie cloth, decontamination powder, etc. are easy to scratch the tableware surface, which is more susceptible to pollution, so it is better not to use them. At the same time, try not to put acid, oily and alkaline food in use for a long time, especially do not put the porcelain tableware containing more oily food in the microwave oven for heating, so as to prevent the release of toxic substances. If you want to put it in the microwave oven, you should avoid metal decoration, such as porcelain tableware with gold edge, silver edge or inlaid pattern with gold paper, metal wire and metal wire.

Introduction of Shandong ceramic cups in 2020

From Xinxiang Ceramic Mug Manufacturers,Tableware market is an important part of billions of daily porcelain industry. Zibo, Shandong Province, China is the production base of ceramic cup. In daily life, the style of people's choice of tableware should complement the design of the restaurant, set off the identity, status, occupation, interest, aesthetic taste and living habits of the host; with the progress and development of society, people pay more and more attention to the concept of systematization of their living environment.



First of all, in the bedroom design, through a unified design, so that all kinds of living appliances are closely linked with each other, to achieve a tacit understanding. Furniture with uniform style, wall and floor decoration, fabrics, lamps and overall color contrast each other, and more and more people turn their eyes to more subtle places, for example, choose a set of tableware suitable for their home atmosphere, the style of tableware should complement the design of the restaurant; more importantly, set off the identity, status, occupation, interest and taste of the host And living habits. A set of tableware with beautiful form and exquisite technology can also adjust people's mood and increase their appetite.

Minimalism, in particular, has the following characteristics, which may help you to pay more and more attention to the quality of life and interest: practicality: according to the survey, the pace of life of modern urbanites has accelerated.Tableware market is an important part of billions of daily porcelain industry. Zibo, Shandong Province, China is the production base of ceramic cup. In daily life, the style of people's choice of tableware should complement the design of the restaurant, set off the identity, status, occupation, interest, aesthetic taste and living habits of the host; with the progress and development of society, people pay more and more attention to the concept of systematization of their living environment.



First of all, in the bedroom design, through a unified design, so that all kinds of living appliances are closely linked with each other, to achieve a tacit understanding. Furniture with uniform style, wall and floor decoration, fabrics, lamps and overall color contrast each other, and more and more people turn their eyes to more subtle places, for example, choose a set of tableware suitable for their home atmosphere, the style of tableware should complement the design of the restaurant; more importantly, set off the identity, status, occupation, interest and taste of the host And living habits. A set of tableware with beautiful form and exquisite technology can also adjust people's mood and increase their appetite.



Minimalism, in particular, has the following characteristics, which may help you to pay more and more attention to the quality of life and interest: practicality: according to the survey, the pace of life of modern urbanites has accelerated.



Therefore, people's requirements for ceramic cups have also increased, that is to say, modern people pay more and more attention to the practical functions of tableware. From this, we can see that the most popular type of tableware is very practical in functional design. This kind of tableware highlights its own functionality and is designed based on the principle of using as the main and decoration as the auxiliary. Tableware with simple shape is quite popular with some busy consumers, especially the white-collar class.Ceramic Coffee Cups Factory



Easy to understand: considering the three aspects of products, operation mode and material use comprehensively, the whole set of tableware can establish a spiritual communication with users. The meal has two materials, stainless steel and plastic. You will have a very comfortable feel when you use it. At the same time, the bright color of the handle also caters to the consumption psychology of fashion pursuers. Family nature: this kind of tableware has its own characteristics in color design, which can adapt to the home environment of different colors. Young couples can choose a set of tableware with bright colors, which can add warmth and romance to your life. Individuation: People's pursuit of life interest is more diversified and personalized. Therefore, tableware that can meet the needs of all people does not exist. Different consumers need products of different styles. Some Personalised Stoneware Coffee Mugs design and modeling are unique, with quite different taste, strong color contrast, and a sense of the times. It is very suitable for young people who pursue individuality.




Therefore, people's requirements for ceramic cups have also increased, that is to say, modern people pay more and more attention to the practical functions of tableware. From this, we can see that the most popular type of tableware is very practical in functional design. This kind of tableware highlights its own functionality and is designed based on the principle of using as the main and decoration as the auxiliary. Tableware with simple shape is quite popular with some busy consumers, especially the white-collar class.Ceramic Coffee Cups Factory



Easy to understand: considering the three aspects of products, operation mode and material use comprehensively, the whole set of tableware can establish a spiritual communication with users. The meal has two materials, stainless steel and plastic. You will have a very comfortable feel when you use it. At the same time, the bright color of the handle also caters to the consumption psychology of fashion pursuers. Family nature: this kind of tableware has its own characteristics in color design, which can adapt to the home environment of different colors. Young couples can choose a set of tableware with bright colors, which can add warmth and romance to your life. Individuation: People's pursuit of life interest is more diversified and personalized. Therefore, tableware that can meet the needs of all people does not exist. Different consumers need products of different styles. Some tableware design and modeling are unique, with quite different taste, strong color contrast, and a sense of the times. It is very suitable for young people who pursue individuality.

Ceramic coffee mugs common sense of tableware in the world

From Xinxiang Ceramic Mug Manufacturers,1. Western food

Leading role: all kinds of dishes, spoons, knives and forks,  ceramic coffee cups factory, saucers at the bottom of coffee cups, sugar cups, milk cans

Supporting roles: ice bucket, coaster, wine glass, cloth mat, Candlestick, napkin

Western food is a synonym in Chinese dictionaries. Eating a candlelight dinner with a set of standard Western-style tableware is the favorite sentiment of lovers. Despite the tedious tableware and complicated etiquette, Western food is always enjoyed by Chinese people who are used to bustling because of its quiet and elegant atmosphere.

Western tableware is very decorative. Knives, forks, spoons are all necessary. According to the introduction of professionals, the division of work of Western food knife is meticulous, including big knife, medium knife, small knife and even special butter knife. Fork is also divided into big fork and medium fork. Generally speaking, medium fork is used for pickling, and medium fork is also used most. Spoon is the most exquisite tableware in Western food, including big spoon, medium spoon, small spoon, coffee spoon, teaspoon, salad spoon, etc. According to the rules of serving Western food, don't rush to move all the beautiful tableware up. The tableware should come on the stage with the food in the order of wine, appetizer, soup, fish, meat, salad, dessert, and finally bread. The tableware should match with it.

Western style tableware has distinct styles and various specifications. If you are not too keen on standard western food, you can buy a whole set of Western tableware at a time in general shopping malls.

2. Chinese food

Leading role: Chinese rice bowl, soup bowl, chopsticks, Chinese spoon, flat plate, soy sauce plate

Supporting role: chopsticks seat, meal mat, wine set, custom tea cups and saucers, tissue box

With the increasing wealth of material life today, Chinese tableware is also emerging, not only has more types of tableware, tableware division is also more meticulous. Chinese tableware is mainly made of ceramics, which can be divided into traditional and modern schools. Traditional tableware includes elegant blue and white porcelain, inlaid with Phnom Penh, representative of festive Manchu tableware, classical and full of Chinese white jade tableware, etc.; while modern tableware often uses some simple patterns or lines to reflect modern style.

Some people no longer use a single set of cutlery, but choose two or more sets of cutlery with different shapes to distinguish different dishes, such as using different cutlery to hold cold dishes, hot dishes and soup, which cleverly adds dining interest through the combination of cutlery forms.

In addition, more and more attention has been paid to the accessories used to decorate tableware. Small decorations such as meal mats and napkins can make the dining atmosphere more elegant, and can also make dining the most common daily behavior artistic. Nowadays, there are various kinds of tableware ornaments with rich colors and materials. You can buy fancy tableware in many Chinese style decoration shops

3. Japanese and Korean cuisine

Leading role: Japanese bowl, chopsticks, seasoning pot, sake pot, various dishes

Supporting role: wine cup, tea cup, chopsticks seat, meal mat, napkin cover

The diet of Japan and South Korea is light and healthy. Therefore, although Japanese and Korean dishes have entered China far less than Western dishes, they have entered the common people's homes with the trend because they do not need to burn or eat raw in an environmentally sound way.

Japanese and Korean ceramic coffee cups factory is mainly made of simple pottery, and its color is mainly pure white, black, dark green and brown. Japanese and Korean cuisine pays attention to details, and tableware is exquisite and exquisite. In particular, those with high grade and emphasis on artistry tend to be particularly free in modeling; in terms of tableware arrangement, such as front dishes, several different dishes are often placed on a large plate, some are placed directly on a plate, some are filled with small cups and plates or a small leaf, which are relatively interwoven and picturesque with each other, which is very charming. There are many kinds of tableware in Japan and South Korea. In addition to various cups and bowls, there are square plates, deep plates, shallow plates, small saucers, soy saucers, and soy saucers. There are also Bento boxes, fruit boxes, trays and other wood and bamboo paint, the color of which is mainly red and black, fully showing the exotic Oriental customs.

The secret of drinking ceramic coffee mugs

From Xinxiang Ceramic Mug Manufacturers,Although the paint on the inner wall of the ceramic mug is bright, there are heavy metals such as lead, mercury and cadmium in the glaze. Among them, cadmium and lead are easy to cause liver or other visceral poisoning, while Mercury can cause liver and kidney sclerosis. The more the glaze color, the brighter the color, the more lead, cadmium and other compounds.

When choosing ceramic mugs, don't pay too much attention to the pattern, especially the bowls with painted inner walls. The newly purchased custom ceramic coffee mugs can be soaked in vinegar for 2-3 hours to dissolve the harmful substances in the colored glaze. In addition, color porcelain should not be heated in microwave oven.